#include <TelepathyQt4/MediaStreamHandler>

Inherits Tp::AbstractInterface.

Public Slots

QDBusPendingReply CodecChoice (uint codecID, int timeout=-1)
QDBusPendingReply Error (uint errorCode, const QString &message, int timeout=-1)
QDBusPendingReply NativeCandidatesPrepared (int timeout=-1)
QDBusPendingReply NewActiveCandidatePair (const QString &nativeCandidateID, const QString &remoteCandidateID, int timeout=-1)
QDBusPendingReply NewActiveTransportPair (const QString &nativeCandidateID, const Tp::MediaStreamHandlerTransport &nativeTransport, const QString &remoteCandidateID, const Tp::MediaStreamHandlerTransport &remoteTransport, int timeout=-1)
QDBusPendingReply NewNativeCandidate (const QString &candidateID, const Tp::MediaStreamHandlerTransportList &transports, int timeout=-1)
QDBusPendingReply Ready (const Tp::MediaStreamHandlerCodecList &codecs, int timeout=-1)
QDBusPendingReply SetLocalCodecs (const Tp::MediaStreamHandlerCodecList &codecs, int timeout=-1)
QDBusPendingReply StreamState (uint state, int timeout=-1)
QDBusPendingReply SupportedCodecs (const Tp::MediaStreamHandlerCodecList &codecs, int timeout=-1)
QDBusPendingReply CodecsUpdated (const Tp::MediaStreamHandlerCodecList &codecs, int timeout=-1)
QDBusPendingReply HoldState (bool held, int timeout=-1)
QDBusPendingReply UnholdFailure (int timeout=-1)

Signals

void AddRemoteCandidate (const QString &candidateID, const Tp::MediaStreamHandlerTransportList &transports)
void Close ()
void RemoveRemoteCandidate (const QString &candidateID)
void SetActiveCandidatePair (const QString &nativeCandidateID, const QString &remoteCandidateID)
void SetRemoteCandidateList (const Tp::MediaStreamHandlerCandidateList &remoteCandidates)
void SetRemoteCodecs (const Tp::MediaStreamHandlerCodecList &codecs)
void SetStreamPlaying (bool playing)
void SetStreamSending (bool sending)
void StartTelephonyEvent (uchar event)
void StartNamedTelephonyEvent (uchar event, uint codecID)
void StartSoundTelephonyEvent (uchar event)
void StopTelephonyEvent ()
void SetStreamHeld (bool held)

Public Member Functions

MediaStreamHandlerInterface (const QString &busName, const QString &objectPath, QObject *parent=0)
MediaStreamHandlerInterface (const QDBusConnection &connection, const QString &busName, const QString &objectPath, QObject *parent=0)
MediaStreamHandlerInterface (Tp::DBusProxy *proxy)
Tp::PendingVariant * requestPropertySTUNServers () const
Tp::PendingVariant * requestPropertyCreatedLocally () const
Tp::PendingVariant * requestPropertyNATTraversal () const
Tp::PendingVariant * requestPropertyRelayInfo () const
Tp::PendingVariantMap * requestAllProperties () const

Static Public Member Functions

static QLatin1String staticInterfaceName ()

Protected Member Functions

virtual void invalidate (Tp::DBusProxy *, const QString &, const QString &)

Detailed Description

Proxy class providing a 1:1 mapping of the D-Bus interface "org.freedesktop.Telepathy.Media.StreamHandler."

Constructor & Destructor Documentation

Tp::Client::MediaStreamHandlerInterface::MediaStreamHandlerInterface	(	const QString &	busName,
		const QString &	objectPath,
		QObject *	parent = `0`
	)

Creates a MediaStreamHandlerInterface associated with the given object on the session bus.

Parameters:

	busName	Name of the service the object is on.
	objectPath	Path to the object on the service.
	parent	Passed to the parent class constructor.

Tp::Client::MediaStreamHandlerInterface::MediaStreamHandlerInterface	(	const QDBusConnection &	connection,
		const QString &	busName,
		const QString &	objectPath,
		QObject *	parent = `0`
	)

Creates a MediaStreamHandlerInterface associated with the given object on the given bus.

Parameters:

	connection	The bus via which the object can be reached.
	busName	Name of the service the object is on.
	objectPath	Path to the object on the service.
	parent	Passed to the parent class constructor.

Tp::Client::MediaStreamHandlerInterface::MediaStreamHandlerInterface ( Tp::DBusProxy * proxy )

Creates a MediaStreamHandlerInterface associated with the same object as the given proxy.

Parameters:

proxy

The proxy to use. It will also be the QObject::parent() for this object.

Member Function Documentation

static QLatin1String Tp::Client::MediaStreamHandlerInterface::staticInterfaceName ( ) [inline, static]

Returns the name of the interface "org.freedesktop.Telepathy.Media.StreamHandler", which this class represents.

Returns:: The D-Bus interface name.

Tp::PendingVariant* Tp::Client::MediaStreamHandlerInterface::requestPropertySTUNServers ( ) const [inline]

Asynchronous getter for the remote object property STUNServers of type Tp::SocketAddressIPList.

The IP addresses of possible STUN servers to use for NAT traversal, as dotted-quad IPv4 address literals or RFC2373 IPv6 address literals. This property cannot change once the stream has been created, so there is no change notification. The IP addresses MUST NOT be given as DNS hostnames. High-quality connection managers already need an asynchronous DNS resolver, so they might as well resolve this name to an IP to make life easier for streaming implementations.

Returns:: A pending variant which will emit finished when the property has been retrieved.

Tp::PendingVariant* Tp::Client::MediaStreamHandlerInterface::requestPropertyCreatedLocally ( ) const [inline]

Asynchronous getter for the remote object property CreatedLocally of type bool.

True if we were the creator of this stream, false otherwise. This information is needed for some nat traversal mechanisms, such as ICE-UDP, where the creator gets the role of the controlling agent.

Returns:: A pending variant which will emit finished when the property has been retrieved.

Tp::PendingVariant* Tp::Client::MediaStreamHandlerInterface::requestPropertyNATTraversal ( ) const [inline]

Asynchronous getter for the remote object property NATTraversal of type QString.

The transport (NAT traversal technique) to be used for this stream. Well-known values include:

none: Raw UDP, with or without STUN, should be used. If the STUNServers property is non-empty, STUN SHOULD be used.
stun: A deprecated synonym for 'none'.
gtalk-p2p: Google Talk peer-to-peer connectivity establishment should be used, as implemented in libjingle 0.3.
ice-udp: Interactive Connectivity Establishment should be used, as defined by the IETF MMUSIC working group.
wlm-8.5: The transport used by Windows Live Messenger 8.5 or later, which resembles ICE draft 6, should be used.
wlm-2009: The transport used by Windows Live Messenger 2009 or later, which resembles ICE draft 19, should be used.

This property cannot change once the stream has been created, so there is no change notification.

Returns:: A pending variant which will emit finished when the property has been retrieved.

Tp::PendingVariant* Tp::Client::MediaStreamHandlerInterface::requestPropertyRelayInfo ( ) const [inline]

Asynchronous getter for the remote object property RelayInfo of type Tp::StringVariantMapList.

A list of mappings describing TURN or Google relay servers available for the client to use in its candidate gathering, as determined from the protocol. Map keys are:

ip - s

The IP address of the relay server as a dotted-quad IPv4 address literal or an RFC2373 IPv6 address literal. This MUST NOT be a DNS hostname.

High-quality connection managers already need an asynchronous DNS resolver, so they might as well resolve this name to an IP and make life easier for streaming implementations.

type - s

Either udp for UDP (UDP MUST be assumed if this key is omitted), tcp for TCP, or tls.

The precise meaning of this key depends on the NATTraversal property: if NATTraversal is ice-udp, tls means TLS over TCP as referenced by ICE draft 19, and if NATTraversal is gtalk-p2p, tls means a fake SSL session over TCP as implemented by libjingle.

port - q

The UDP or TCP port of the relay server as an ASCII unsigned integer

username - s

The username to use

password - s

The password to use

component - u

The component number to use this relay server for, as an ASCII unsigned integer; if not included, this relay server may be used for any or all components.

In ICE draft 6, as used by Google Talk, credentials are only valid once, so each component needs relaying separately.

An equivalent of the gtalk-p2p-relay-token property on MediaSignalling channels is not included here. The connection manager should be responsible for making the necessary HTTP requests to turn the token into a username and password.

The type of relay server that this represents depends on the value of the NATTraversal property. If NATTraversal is ice-udp, this is a TURN server; if NATTraversal is gtalk-p2p, this is a Google relay server; otherwise, the meaning of RelayInfo is undefined.

If relaying is not possible for this stream, the list is empty.

This property cannot change once the stream has been created, so there is no change notification.

Returns:: A pending variant which will emit finished when the property has been retrieved.

Tp::PendingVariantMap* Tp::Client::MediaStreamHandlerInterface::requestAllProperties ( ) const [inline]

Request all of the DBus properties on the interface.

Returns:: A pending variant map which will emit finished when the properties have been retrieved.

QDBusPendingReply Tp::Client::MediaStreamHandlerInterface::CodecChoice	(	uint	codecID,
		int	timeout = `-1`
	)			`[inline, slot]`

Begins a call to the D-Bus method CodecChoice on the remote object.

Inform the connection manager of codec used to receive data.

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters:

timeout

The timeout in milliseconds.

QDBusPendingReply Tp::Client::MediaStreamHandlerInterface::Error	(	uint	errorCode,
		const QString &	message,
		int	timeout = `-1`
	)			`[inline, slot]`

Begins a call to the D-Bus method Error on the remote object.

Inform the connection manager that an error occured in this stream. The connection manager should emit the StreamError signal for the stream on the relevant channel, and remove the stream from the session.

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters:

	errorCode	ID of error, from the MediaStreamError enumeration
	message	String describing the error
	timeout	The timeout in milliseconds.

QDBusPendingReply Tp::Client::MediaStreamHandlerInterface::NativeCandidatesPrepared ( int timeout = -1 ) [inline, slot]

Begins a call to the D-Bus method NativeCandidatesPrepared on the remote object.

Informs the connection manager that all possible native candisates have been discovered for the moment.

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters:

timeout

The timeout in milliseconds.

QDBusPendingReply Tp::Client::MediaStreamHandlerInterface::NewActiveCandidatePair	(	const QString &	nativeCandidateID,
		const QString &	remoteCandidateID,
		int	timeout = `-1`
	)			`[inline, slot]`

Begins a call to the D-Bus method NewActiveCandidatePair on the remote object.

Informs the connection manager that a valid candidate pair has been discovered and streaming is in progress.

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters:

timeout

The timeout in milliseconds.

QDBusPendingReply Tp::Client::MediaStreamHandlerInterface::NewActiveTransportPair	(	const QString &	nativeCandidateID,
		const Tp::MediaStreamHandlerTransport &	nativeTransport,
		const QString &	remoteCandidateID,
		const Tp::MediaStreamHandlerTransport &	remoteTransport,
		int	timeout = `-1`
	)			`[inline, slot]`

Begins a call to the D-Bus method NewActiveTransportPair on the remote object.

Informs the connection manager that a valid transport pair has been discovered and streaming is in progress. Component id MUST be the same for both transports and the pair is only valid for that component. The connection manager might need to send the details of the active transport pair (e.g. c and o parameters of SDP body need to contain address of selected native RTP transport as stipulated by RFC 5245). However, the candidate ID might not be enough to determine these info if the transport was found after NativeCandidatesPrepared has been called (e.g. peer reflexive ICE candidate). This method must be called before NewActiveCandidatePair. This way, connection managers supporting this method can safely ignore subsequent NewActiveCandidatePair call. Connection managers SHOULD NOT implement this method unless they need to inform the peer about selected transports. As a result, streaming implementations MUST NOT treat errors raised by this method as fatal. Usually, connection managers only need to do one answer/offer round-trip. However, some protocols give the possibility to to send an updated offer (e.g. ICE defines such mechanism to avoid some race conditions and to properly set the state of gateway devices).

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters:

timeout

The timeout in milliseconds.

QDBusPendingReply Tp::Client::MediaStreamHandlerInterface::NewNativeCandidate	(	const QString &	candidateID,
		const Tp::MediaStreamHandlerTransportList &	transports,
		int	timeout = `-1`
	)			`[inline, slot]`

Begins a call to the D-Bus method NewNativeCandidate on the remote object.

Inform this MediaStreamHandler that a new native transport candidate has been ascertained.

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters:

	candidateID	String identifier for this candidate
	transports	Array of transports for this candidate, with fields: component number IP address (as a string) port base network protocol (one of the values of MediaStreamBaseProto) proto subtype (e.g. RTP) proto profile (e.g. AVP) our preference value of this transport (double in range 0.0-1.0 inclusive); 1 signals the most preferred transport transport type, one of the values of MediaStreamTransportType username if authentication is required password if authentication is required
	timeout	The timeout in milliseconds.

QDBusPendingReply Tp::Client::MediaStreamHandlerInterface::Ready	(	const Tp::MediaStreamHandlerCodecList &	codecs,
		int	timeout = `-1`
	)			`[inline, slot]`

Begins a call to the D-Bus method Ready on the remote object.

Inform the connection manager that a client is ready to handle this StreamHandler. Also provide it with info about all supported codecs.

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters:

	codecs	Locally-supported codecs.
	timeout	The timeout in milliseconds.

QDBusPendingReply Tp::Client::MediaStreamHandlerInterface::SetLocalCodecs	(	const Tp::MediaStreamHandlerCodecList &	codecs,
		int	timeout = `-1`
	)			`[inline, slot]`

Begins a call to the D-Bus method SetLocalCodecs on the remote object.

Used to provide codecs after Ready(), so the media client can go ready for an incoming call and exchange candidates/codecs before knowing what local codecs are available.

This is useful for gatewaying calls between two connection managers. Given an incoming call, you need to call Ready() to get the remote codecs before you can use them as the "local" codecs to place the outgoing call, and hence receive the outgoing call's remote codecs to use as the incoming call's "local" codecs.

In this situation, you would pass an empty list of codecs to the incoming call's Ready method, then later call SetLocalCodecs on the incoming call in order to respond to the offer.

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters:

	codecs	Locally-supported codecs
	timeout	The timeout in milliseconds.

QDBusPendingReply Tp::Client::MediaStreamHandlerInterface::StreamState	(	uint	state,
		int	timeout = `-1`
	)			`[inline, slot]`

Begins a call to the D-Bus method StreamState on the remote object.

Informs the connection manager of the stream's current state, as as specified in Channel.Type.StreamedMedia::ListStreams.

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters:

timeout

The timeout in milliseconds.

QDBusPendingReply Tp::Client::MediaStreamHandlerInterface::SupportedCodecs	(	const Tp::MediaStreamHandlerCodecList &	codecs,
		int	timeout = `-1`
	)			`[inline, slot]`

Begins a call to the D-Bus method SupportedCodecs on the remote object.

Inform the connection manager of the supported codecs for this session. This is called after the connection manager has emitted SetRemoteCodecs to notify what codecs are supported by the peer, and will thus be an intersection of all locally supported codecs (passed to Ready) and those supported by the peer.

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters:

	codecs	Locally supported codecs.
	timeout	The timeout in milliseconds.

QDBusPendingReply Tp::Client::MediaStreamHandlerInterface::CodecsUpdated	(	const Tp::MediaStreamHandlerCodecList &	codecs,
		int	timeout = `-1`
	)			`[inline, slot]`

Begins a call to the D-Bus method CodecsUpdated on the remote object.

Inform the connection manager that the parameters of the supported codecs for this session have changed. The connection manager should send the new parameters to the remote contact. This is required for H.264 and Theora, for example.

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters:

	codecs	Locally supported codecs, which SHOULD be the same as were previously in effect, but possibly with different parameters.
	timeout	The timeout in milliseconds.

QDBusPendingReply Tp::Client::MediaStreamHandlerInterface::HoldState	(	bool	held,
		int	timeout = `-1`
	)			`[inline, slot]`

Begins a call to the D-Bus method HoldState on the remote object.

Notify the connection manager that the stream's hold state has been changed successfully in response to SetStreamHeld.

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters:

	held	If true, the stream is now on hold.
	timeout	The timeout in milliseconds.

QDBusPendingReply Tp::Client::MediaStreamHandlerInterface::UnholdFailure ( int timeout = -1 ) [inline, slot]

Begins a call to the D-Bus method UnholdFailure on the remote object.

Notify the connection manager that an attempt to reacquire the necessary hardware or software resources to unhold the stream, in response to SetStreamHeld, has failed.

Note that timeout is ignored as of now. It will be used once http://bugreports.qt.nokia.com/browse/QTBUG-11775 is fixed.

Parameters:

timeout

The timeout in milliseconds.

void Tp::Client::MediaStreamHandlerInterface::AddRemoteCandidate	(	const QString &	candidateID,
		const Tp::MediaStreamHandlerTransportList &	transports
	)			`[signal]`

Represents the signal AddRemoteCandidate on the remote object.

Signal emitted when the connection manager wishes to inform the client of a new remote candidate.

Parameters:

	candidateID	String identifier for this candidate
	transports	Array of transports for this candidate with fields, as defined in NewNativeCandidate

void Tp::Client::MediaStreamHandlerInterface::Close ( ) [signal]

Represents the signal Close on the remote object.

Signal emitted when the connection manager wishes the stream to be closed.

void Tp::Client::MediaStreamHandlerInterface::RemoveRemoteCandidate ( const QString & candidateID ) [signal]

Represents the signal RemoveRemoteCandidate on the remote object.

Signal emitted when the connection manager wishes to inform the client that the remote end has removed a previously usable candidate. It seemed like a good idea at the time, but wasn't.

Parameters:

candidateID

String identifier for remote candidate to drop

void Tp::Client::MediaStreamHandlerInterface::SetActiveCandidatePair	(	const QString &	nativeCandidateID,
		const QString &	remoteCandidateID
	)			`[signal]`

Represents the signal SetActiveCandidatePair on the remote object.

Emitted by the connection manager to inform the client that a valid candidate pair has been discovered by the remote end and streaming is in progress.

void Tp::Client::MediaStreamHandlerInterface::SetRemoteCandidateList ( const Tp::MediaStreamHandlerCandidateList & remoteCandidates ) [signal]

Represents the signal SetRemoteCandidateList on the remote object.

Signal emitted when the connection manager wishes to inform the client of all the available remote candidates at once.

Parameters:

remoteCandidates

A list of candidate id and a list of transports as defined in NewNativeCandidate

void Tp::Client::MediaStreamHandlerInterface::SetRemoteCodecs ( const Tp::MediaStreamHandlerCodecList & codecs ) [signal]

Represents the signal SetRemoteCodecs on the remote object.

Signal emitted when the connection manager wishes to inform the client of the codecs supported by the remote end. If these codecs are compatible with the remote codecs, then the client must call SupportedCodecs, otherwise call Error.

Parameters:

codecs

Codecs supported by the remote peer.

void Tp::Client::MediaStreamHandlerInterface::SetStreamPlaying ( bool playing ) [signal]

Represents the signal SetStreamPlaying on the remote object.

If emitted with argument TRUE, this means that the connection manager wishes to set the stream playing; this means that the streaming implementation should expect to receive data. If emitted with argument FALSE this signal is basically meaningless and should be ignored. We're very sorry.

void Tp::Client::MediaStreamHandlerInterface::SetStreamSending ( bool sending ) [signal]

Represents the signal SetStreamSending on the remote object.

Signal emitted when the connection manager wishes to set whether or not the stream sends to the remote end.

void Tp::Client::MediaStreamHandlerInterface::StartTelephonyEvent ( uchar event ) [signal]

Represents the signal StartTelephonyEvent on the remote object.

Request that a telephony event (as defined by RFC 4733) is transmitted over this stream until StopTelephonyEvent is called.

Parameters:

event

A telephony event code.

void Tp::Client::MediaStreamHandlerInterface::StartNamedTelephonyEvent	(	uchar	event,
		uint	codecID
	)			`[signal]`

Represents the signal StartNamedTelephonyEvent on the remote object.

Request that a telephony event (as defined by RFC 4733) is transmitted over this stream until StopTelephonyEvent is called. This differs from StartTelephonyEvent in that you force the event to be transmitted as a RFC 4733 named event, not as sound. You can also force a specific Codec ID.

Parameters:

	event	A telephony event code as defined by RFC 4733.
	codecID	The payload type to use when sending events. The value 0xFFFFFFFF means to send with the already configured event type instead of using the specified one.

void Tp::Client::MediaStreamHandlerInterface::StartSoundTelephonyEvent ( uchar event ) [signal]

Represents the signal StartSoundTelephonyEvent on the remote object.

Request that a telephony event (as defined by RFC 4733) is transmitted over this stream until StopTelephonyEvent is called. This differs from StartTelephonyEvent in that you force the event to be transmitted as sound instead of as a named event.

Parameters:

event

A telephony event code as defined by RFC 4733.

void Tp::Client::MediaStreamHandlerInterface::StopTelephonyEvent ( ) [signal]

Represents the signal StopTelephonyEvent on the remote object.

Request that any ongoing telephony events (as defined by RFC 4733) being transmitted over this stream are stopped.

void Tp::Client::MediaStreamHandlerInterface::SetStreamHeld ( bool held ) [signal]

Represents the signal SetStreamHeld on the remote object.

Emitted when the connection manager wishes to place the stream on hold (so the streaming client should free hardware or software resources) or take the stream off hold (so the streaming client should reacquire the necessary resources).

When placing a channel's streams on hold, the connection manager SHOULD notify the remote contact that this will be done (if appropriate in the protocol) before it emits this signal.

It is assumed that relinquishing a resource will not fail. If it does, the call is probably doomed anyway.

When unholding a channel's streams, the connection manager SHOULD emit this signal and wait for success to be indicated via HoldState before it notifies the remote contact that the channel has been taken off hold.

This means that if a resource is unavailable, the remote contact will never even be told that we tried to acquire it.

Parameters:

held

If true, the stream is to be placed on hold.

void Tp::Client::MediaStreamHandlerInterface::invalidate	(	Tp::DBusProxy *	proxy,
		const QString &	error,
		const QString &	message
	)			`[protected, virtual]`

Reimplemented from Tp::AbstractInterface.

Tp::Client::MediaStreamHandlerInterface Class Reference [Media stream handler proxies]

Public Slots

Signals

Public Member Functions

Static Public Member Functions

Protected Member Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Tp::Client::MediaStreamHandlerInterface Class Reference
[Media stream handler proxies]