Q3TextStream Class Reference

 #include <Q3TextStream>

Member Function Documentation

Q3TextStream::Q3TextStream ()

Constructs a data stream that has no IO device.

Q3TextStream::Q3TextStream ( QIODevice * iod )

Constructs a text stream that uses the IO device iod.

Q3TextStream::Q3TextStream ( QString * str, int filemode )

Constructs a text stream that operates on the Unicode QString, str, through an internal device. The filemode argument is passed to the device's open() function; see QIODevice::mode().

If you set an encoding or codec with setEncoding() or setCodec(), this setting is ignored for text streams that operate on QString.

Example:

 QString str;
 Q3TextStream ts( &str, IO_WriteOnly );
 ts << "pi = " << 3.14; // str == "pi = 3.14"

Writing data to the text stream will modify the contents of the string. The string will be expanded when data is written beyond the end of the string. Note that the string will not be truncated:

 QString str = "pi = 3.14";
 Q3TextStream ts( &str, IO_WriteOnly );
 ts <<  "2+2 = " << 2+2; // str == "2+2 = 414"

Note that because QString is Unicode, you should not use readRawBytes() or writeRawBytes() on such a stream.

Q3TextStream::Q3TextStream ( QByteArray & a, int mode )

Constructs a text stream that operates on the byte array, a, through an internal QBuffer device. The mode argument is passed to the device's open() function; see QIODevice::mode().

Example:

 QByteArray array;
 Q3TextStream ts( array, IO_WriteOnly );
 ts << "pi = " << 3.14 << '\0'; // array == "pi = 3.14"

Writing data to the text stream will modify the contents of the array. The array will be expanded when data is written beyond the end of the string.

Same example, using a QBuffer:

 QByteArray array;
 QBuffer buf( array );
 buf.open( IO_WriteOnly );
 Q3TextStream ts( &buf );
 ts << "pi = " << 3.14 << '\0'; // array == "pi = 3.14"
 buf.close();

Q3TextStream::Q3TextStream ( FILE * fh, int mode )

Constructs a text stream that operates on an existing file handle fh through an internal QFile device. The mode argument is passed to the device's open() function; see QIODevice::mode().

Note that if you create a Q3TextStream cout or another name that is also used for another variable of a different type, some linkers may confuse the two variables, which will often cause crashes.

Q3TextStream::~Q3TextStream () [virtual]

Destroys the text stream.

The destructor does not affect the current IO device.

bool Q3TextStream::atEnd () const

Returns TRUE if the IO device has reached the end position (end of the stream or file) or if there is no IO device set; otherwise returns FALSE.

This function was introduced in Qt 4.2.

See also QIODevice::atEnd().

QTextCodec * Q3TextStream::codec ()

Returns the codec actually used for this stream.

If Unicode is automatically detected in input, a codec with name() "ISO-10646-UCS-2" is returned.

This function was introduced in Qt 4.2.

See also setCodec().

QIODevice * Q3TextStream::device () const

Returns the IO device currently set.

This function was introduced in Qt 4.2.

See also setDevice() and unsetDevice().

int Q3TextStream::fill () const

Returns the fill character. The default value is ' ' (space).

This function was introduced in Qt 4.2.

int Q3TextStream::fill ( int f )

This is an overloaded function.

Sets the fill character to f. Returns the previous fill character.

int Q3TextStream::flags () const

Returns the current stream flags. The default value is 0.

Flag	Meaning
skipws	Not currently used; whitespace always skipped
left	Numeric fields are left-aligned
right	Not currently used (by default, numerics are right-aligned)
internal	Puts any padding spaces between +/- and value
bin	Output and input only in binary
oct	Output and input only in octal
dec	Output and input only in decimal
hex	Output and input only in hexadecimal
showbase	Annotates numeric outputs with 0b, 0, or 0x if in bin, oct, or hex format
showpoint	Not currently used
uppercase	Uses 0B and 0X rather than 0b and 0x
showpos	Shows + for positive numeric values
scientific	Uses scientific notation for floating point values
fixed	Uses fixed-point notation for floating point values

Note that unless bin, oct, dec, or hex is set, the input base is octal if the value starts with 0, hexadecimal if it starts with 0x, binary if it starts with 0b, and decimal otherwise.

This function was introduced in Qt 4.2.

See also setf() and unsetf().

int Q3TextStream::flags ( int f )

This is an overloaded function.

Sets the stream flags to f. Returns the previous stream flags.

See also setf(), unsetf(), and flags().

int Q3TextStream::precision () const

Returns the precision. The default value is 6.

This function was introduced in Qt 4.2.

int Q3TextStream::precision ( int p )

This is an overloaded function.

Sets the precision to p. Returns the previous precision setting.

QString Q3TextStream::read ()

Reads the entire stream from the current position, and returns a string containing the text.

This function was introduced in Qt 4.2.

See also readLine().

QString Q3TextStream::readLine ()

Reads a line from the stream and returns a string containing the text.

The returned string does not contain any trailing newline or carriage return. Note that this is different from QIODevice::readLine(), which does not strip the newline at the end of the line.

On EOF you will get a QString that is null. On reading an empty line the returned QString is empty but not null.

This function was introduced in Qt 4.2.

See also QIODevice::readLine().

Q3TextStream & Q3TextStream::readRawBytes ( char * s, uint len )

Reads len bytes from the stream into s and returns a reference to the stream.

The buffer s must be preallocated.

Note that no encoding is done by this function.

Warning: The behavior of this function is undefined unless the stream's encoding is set to Unicode or Latin1.

This function was introduced in Qt 4.2.

See also QIODevice::readBlock().

void Q3TextStream::reset ()

Resets the text stream.

• All flags are set to 0.
• The field width is set to 0.
• The fill character is set to ' ' (Space).
• The precision is set to 6.

This function was introduced in Qt 4.2.

See also setf(), width(), fill(), and precision().

void Q3TextStream::setCodec ( QTextCodec * codec )

Sets the codec for this stream to codec. Will not try to autodetect Unicode.

Note that this function should be called before any data is read to/written from the stream.

This function was introduced in Qt 4.2.

See also setEncoding() and codec().

void Q3TextStream::setDevice ( QIODevice * iod )

Sets the IO device to iod.

This function was introduced in Qt 4.2.

See also device() and unsetDevice().

void Q3TextStream::setEncoding ( Encoding e )

Sets the encoding of this stream to e, where e is one of the following values:

Encoding	Meaning
Locale	Uses local file format (Latin1 if locale is not set), but autodetecting Unicode(utf16) on input.
Unicode	Uses Unicode(utf16) for input and output. Output will be written in the order most efficient for the current platform (i.e. the order used internally in QString).
UnicodeUTF8	Using Unicode(utf8) for input and output. If you use it for input it will autodetect utf16 and use it instead of utf8.
Latin1	ISO-8859-1. Will not autodetect utf16.
UnicodeNetworkOrder	Uses network order Unicode(utf16) for input and output. Useful when reading Unicode data that does not start with the byte order marker.
UnicodeReverse	Uses reverse network order Unicode(utf16) for input and output. Useful when reading Unicode data that does not start with the byte order marker or when writing data that should be read by buggy Windows applications.
RawUnicode	Like Unicode, but does not write the byte order marker nor does it auto-detect the byte order. Useful only when writing to non-persistent storage used by a single process.

Locale and all Unicode encodings, except RawUnicode, will look at the first two bytes in an input stream to determine the byte order. The initial byte order marker will be stripped off before data is read.

Note that this function should be called before any data is read to or written from the stream.

This function was introduced in Qt 4.2.

See also setCodec().

int Q3TextStream::setf ( int bits )

Sets the stream flag bits bits. Returns the previous stream flags.

Equivalent to flags( flags() | bits ).

This function was introduced in Qt 4.2.

See also unsetf().

int Q3TextStream::setf ( int bits, int mask )

This is an overloaded function.

Sets the stream flag bits bits with a bit mask mask. Returns the previous stream flags.

Equivalent to flags( (flags() & ~mask) | (bits & mask) ).

See also setf() and unsetf().

void Q3TextStream::skipWhiteSpace ()

Positions the read pointer at the first non-whitespace character.

This function was introduced in Qt 4.2.

void Q3TextStream::unsetDevice ()

Unsets the IO device. Equivalent to setDevice( 0 ).

This function was introduced in Qt 4.2.

See also device() and setDevice().

int Q3TextStream::unsetf ( int bits )

Clears the stream flag bits bits. Returns the previous stream flags.

Equivalent to flags( flags() & ~mask ).

This function was introduced in Qt 4.2.

See also setf().

int Q3TextStream::width () const

Returns the field width. The default value is 0.

This function was introduced in Qt 4.2.

int Q3TextStream::width ( int w )

This is an overloaded function.

Sets the field width to w. Returns the previous field width.

Q3TextStream & Q3TextStream::writeRawBytes ( const char * s, uint len )

Writes the len bytes from s to the stream and returns a reference to the stream.

Note that no encoding is done by this function.

This function was introduced in Qt 4.2.

See also QIODevice::writeBlock().

Q3TextStream & Q3TextStream::operator<< ( QChar c )

Writes character char to the stream and returns a reference to the stream.

The character c is assumed to be Latin1 encoded independent of the Encoding set for the Q3TextStream.

This function was introduced in Qt 4.2.

Q3TextStream & Q3TextStream::operator<< ( char c )

This is an overloaded function.

Writes character c to the stream and returns a reference to the stream.

This function was introduced in Qt 4.2.

Q3TextStream & Q3TextStream::operator<< ( signed short i )

This is an overloaded function.

Writes a short integer i to the stream and returns a reference to the stream.

This function was introduced in Qt 4.2.

Q3TextStream & Q3TextStream::operator<< ( unsigned short i )

This is an overloaded function.

Writes an unsigned short integer i to the stream and returns a reference to the stream.

This function was introduced in Qt 4.2.

Q3TextStream & Q3TextStream::operator<< ( signed int i )

This is an overloaded function.

Writes an int i to the stream and returns a reference to the stream.

This function was introduced in Qt 4.2.

Q3TextStream & Q3TextStream::operator<< ( unsigned int i )

This is an overloaded function.

Writes an unsigned int i to the stream and returns a reference to the stream.

This function was introduced in Qt 4.2.

Q3TextStream & Q3TextStream::operator<< ( signed long i )

This is an overloaded function.

Writes a long int i to the stream and returns a reference to the stream.

This function was introduced in Qt 4.2.

Q3TextStream & Q3TextStream::operator<< ( unsigned long i )

This is an overloaded function.

Writes an unsigned long int i to the stream and returns a reference to the stream.

This function was introduced in Qt 4.2.

Q3TextStream & Q3TextStream::operator<< ( float f )

This is an overloaded function.

Writes a float f to the stream and returns a reference to the stream.

This function was introduced in Qt 4.2.

Q3TextStream & Q3TextStream::operator<< ( double f )

This is an overloaded function.

Writes a double f to the stream and returns a reference to the stream.

This function was introduced in Qt 4.2.

Q3TextStream & Q3TextStream::operator<< ( const char * s )

This is an overloaded function.

Writes a string to the stream and returns a reference to the stream.

The string s is assumed to be Latin1 encoded independent of the Encoding set for the Q3TextStream.

This function was introduced in Qt 4.2.

Q3TextStream & Q3TextStream::operator<< ( const Q3CString & s )

This is an overloaded function.

Writes s to the stream and returns a reference to the stream.

The string s is assumed to be Latin1 encoded independent of the Encoding set for the Q3TextStream.

This function was introduced in Qt 4.2.

Q3TextStream & Q3TextStream::operator<< ( const QString & s )

This is an overloaded function.

Writes s to the stream and returns a reference to the stream.

This function was introduced in Qt 4.2.

Q3TextStream & Q3TextStream::operator<< ( void * ptr )

This is an overloaded function.

Writes a pointer to the stream and returns a reference to the stream.

The ptr is output as an unsigned long hexadecimal integer.

This function was introduced in Qt 4.2.

Q3TextStream & Q3TextStream::operator>> ( QChar & c )

Reads a char c from the stream and returns a reference to the stream. Note that whitespace is not skipped.

Q3TextStream & Q3TextStream::operator>> ( char & c )

This is an overloaded function.

Reads a char c from the stream and returns a reference to the stream. Note that whitespace is skipped.

Q3TextStream & Q3TextStream::operator>> ( signed short & i )

This is an overloaded function.

Reads a signed short integer i from the stream and returns a reference to the stream. See flags() for an explanation of the expected input format.

Q3TextStream & Q3TextStream::operator>> ( unsigned short & i )

This is an overloaded function.

Reads an unsigned short integer i from the stream and returns a reference to the stream. See flags() for an explanation of the expected input format.

Q3TextStream & Q3TextStream::operator>> ( signed int & i )

This is an overloaded function.

Reads a signed int i from the stream and returns a reference to the stream. See flags() for an explanation of the expected input format.

Q3TextStream & Q3TextStream::operator>> ( unsigned int & i )

This is an overloaded function.

Reads an unsigned int i from the stream and returns a reference to the stream. See flags() for an explanation of the expected input format.

Q3TextStream & Q3TextStream::operator>> ( signed long & i )

This is an overloaded function.

Reads a signed long int i from the stream and returns a reference to the stream. See flags() for an explanation of the expected input format.

Q3TextStream & Q3TextStream::operator>> ( unsigned long & i )

This is an overloaded function.

Reads an unsigned long int i from the stream and returns a reference to the stream. See flags() for an explanation of the expected input format.

Q3TextStream & Q3TextStream::operator>> ( float & f )

This is an overloaded function.

Reads a float f from the stream and returns a reference to the stream. See flags() for an explanation of the expected input format.

Q3TextStream & Q3TextStream::operator>> ( double & f )

This is an overloaded function.

Reads a double f from the stream and returns a reference to the stream. See flags() for an explanation of the expected input format.

Q3TextStream & Q3TextStream::operator>> ( char * s )

This is an overloaded function.

Reads a "word" from the stream into s and returns a reference to the stream.

A word consists of characters for which isspace() returns FALSE.

Q3TextStream & Q3TextStream::operator>> ( QString & str )

This is an overloaded function.

Reads a "word" from the stream into str and returns a reference to the stream.

A word consists of characters for which isspace() returns FALSE.

Q3TextStream & Q3TextStream::operator>> ( Q3CString & str )

This is an overloaded function.

Reads a "word" from the stream into str and returns a reference to the stream.

A word consists of characters for which isspace() returns FALSE.