The Contacts Synchronous API enables a client to synchronously fetch, update, or remove contact data from a contact manager. A synchronous API is of most use to clients who wish to perform simple requests where performance or user interface responsiveness is not critical. Synchronous calls to a contact manager will block until they are completed, and therefore should not be performed in the GUI thread if the manager is a frontend to an online service or long-latency datastore. The main advantage of the synchronous API is its simplicity and convenience.
Most operations which may be performed using the synchronous API may also be performed using the asynchronous API. It is recommended for most applications that the asynchronous API be used where possible.
The synchronous API offered by the Contacts module is available through the QContactManager class. It consists of four major sections:
When a synchronous operation fails, clients need to be able to retrieve error information associated with that synchronous operation. The QContactManager::error() function provides this information to clients.
For some synchronous operations (for example, batch save or remove operations) it is possible that multiple errors may occur during the operation. In those cases, the synchronous function will take a pointer to a map of input index to error, which will be filled by the function as required, and the QContactManager::error() function will report the overall operation error.
Error reporting is handled slightly differently in the asynchronous API, in that each instance of an asynchronous request is able to report any overall operation error as well as the finer-grained map of errors, for the operation which it requested.
The most common type of operation that clients will perform involves retrieval or modification of contacts. The QContactManager class offers synchronous API to retrieve, create, update and delete contacts. The create and update operations are provided through the same interface. Both singular and batch operations are offered by the API.
A contact is identified by its QContactId. This id consists of two parts: a URI which identifies the contact manager which stores the contact, and the local id of the contact in that manager. Some operations which take a pointer to a contact as an argument may modify the contact during the operation; updating the contact id is a common example.
The QContactManager class provides API for accessing the IDs of contacts which are stored in the manager:
The contact id retrieval functionality is also provided via asynchronous API through the QContactLocalIdFetchRequest class.
The synchronous, singular contact manipulation functions offered by the QContactManager class are:
The (optional) fetch argument to the contact accessor function allows clients to tell the plugin which types of information they wish to retrieve. This argument is a hint only, and may be ignored safely by the plugin, or used by the plugin to optimize the performance of the retrieve operation.
The save operation entails a validation step, where the contact's details are checked against the supported schema. If the contact is valid, it will be saved. Note that if the contact already exists in the database (determined by the id of the contact) it will be replaced with the contact contained in the argument. This means that clients should not save any contact which was retrieved with a non-empty fetchHint defined, or data loss may occur.
Any error which occurs during such singular contact manipulation functions may be accessed by calling QContactManager::error() directly after the original synchronous call.
The synchronous, batch contact manipulation functions offered by the QContactManager class are:
The batch save and remove functions both take an (optional) pointer to a map of errors. If the pointer is non-null, this map will be filled out with any errors which occur. The overall operation error of any batch manipulation operation may be accessed by calling QContactManager::error() directly after the original synchronous call.
The contact manipulation functionality is also provided via asynchronous API through the QContactFetchRequest, QContactSaveRequest, and QContactRemoveRequest classes.
The "self" contact is a special concept, which has dedicated API. A client may instruct any backend which supports the concept of a self contact that a particular, previously saved contact is the self contact. Any backend which implements this functionality should report that it supports the QContactManager::SelfContact feature.
The API which provides the self-contact functionality consists of:
In order to unset the self contact, a client may either delete the contact which is currently set as the self contact, or set the self contact id to be the invalid, zero id (constructed via QContactLocalId(0)). The self-contact manipulation functionality is only available via the synchronous API.
Contacts may be related in various ways. The contacts API allows clients to define relationships between contacts if the plugin providing the functionality supports such relationships. Any plugin which supports relationships should report this functionality by reporting that it supports the QContactManager::Relationships feature.
Some plugins support arbitrary relationship types. Clients can define custom relationships between contacts saved in such plugins. Any plugin which supports arbitrary relationship types should report this functionality by reporting that it supports the QContactManager::ArbitraryRelationshipTypes feature.
The API which provides the relationship manipulation functionality consists of:
The relationship manipulation functionality is also provided via asynchronous API through the QContactRelationshipFetchRequest, QContactRelationshipSaveRequest, and QContactRelationshipRemoveRequest classes.
The schema supported by a plugin is the list of detail definitions which are supported by the plugin. A contact which contains a detail of a particular definition which is not supported by the plugin will fail to validate when the user attempts to save it in that manager. The schema also includes any access constraints which may apply to certain details or detail definitions (for example, a particular detail definition might be declared to be unique per-contact in a particular manager).
Every plugin will support a slightly different schema, as the schema which can be supported will depend on the semantics and limitations of the underlying storage platform on which the plugin is based. The default schema is described in the QtMobility Contacts schema documentation, and plugins should attempt to implement that schema; however no guarantees are given to clients as to the conformance of the schemas supported by various plugins to the default schema.
Some plugins support extensible detail types. This means that third party developers can extend the schema of such plugins at run time (for example, to add a new field to a detail). Some plugins allow third party developers to define new detail types (that is, to add an entirely new detail type to the schema supported by that plugin). Plugins which support these types of operations must report to clients that they support the QContactManager::MutableDefinitions feature.
The synchronous API offers several functions to retrieve or modify the schema supported by a plugin:
The schema manipulation functionality is also provided via asynchronous API through the QContactDetailDefinitionFetchRequest, QContactDetailDefinitionSaveRequest and QContactDetailDefinitionRemoveRequest classes.
Note that the schema supported by a plugin may vary depending on the type of contact to which the schema applies. For example, a particular plugin might support name, address, phone number, email address, and gender details for normal contacts, but only name, address, and phone number details for a group contact.
The synchronous API provides the simplest way to access or modify the contact information managed by a particular backend. It has the disadvantage that calls block until completion and is therefore most suitable only for applications which interact with local, high-speed datastores.
The client creates a new contact, adds a name and a phone number, and saves it to the default store of the default manager.
We assume the existence of a specialized leaf-class that allows simple access to details of the definition identified by the "PhoneNumber" identifier, and another that allows simple access to details of the definition identified by the "Name" identifier. These specialized leaf classes may be written by anyone, and simply wrap the functionality provided by QContactDetail in order to allow simpler access to fields supported by a particular definition.
void addContact(QContactManager* cm) { QContact alice; /* Set the contact's name */ QContactName aliceName; aliceName.setFirstName("Alice"); aliceName.setLastName("Jones"); aliceName.setCustomLabel("Ally Jones"); alice.saveDetail(&aliceName); /* Add a phone number */ QContactPhoneNumber number; number.setContexts(QContactDetail::ContextHome); number.setSubTypes(QContactPhoneNumber::SubTypeMobile); number.setNumber("12345678"); alice.saveDetail(&number); alice.setPreferredDetail("DialAction", number); /* Add a second phone number */ QContactPhoneNumber number2; number2.setContexts(QContactDetail::ContextWork); number2.setSubTypes(QContactPhoneNumber::SubTypeLandline); number2.setNumber("555-4444"); alice.saveDetail(&number2); /* Save the contact */ cm->saveContact(&alice) ? qDebug() << "Successfully saved" << aliceName.customLabel() : qDebug() << "Failed to save" << aliceName.customLabel(); qDebug() << "The backend has synthesized a display label for the contact:" << alice.displayLabel(); }
The client utilizes a default manager and asks for any contacts with a particular phone number. The example assumes that the default manager supports the provided QContactPhoneNumber detail leaf class (which implements the default definition for phone number details).
void matchCall(QContactManager* cm, const QString& incomingCallNbr) { QContactDetailFilter phoneFilter; phoneFilter.setDetailDefinitionName(QContactPhoneNumber::DefinitionName, QContactPhoneNumber::FieldNumber); phoneFilter.setValue(incomingCallNbr); phoneFilter.setMatchFlags(QContactFilter::MatchExactly); QList<QContactLocalId> matchingContacts = cm->contactIds(phoneFilter); if (matchingContacts.size() == 0) { qDebug() << "Incoming call from unknown contact (" << incomingCallNbr << ")"; } else { QContact match = cm->contact(matchingContacts.at(0)); qDebug() << "Incoming call from" << match.displayLabel() << "(" << incomingCallNbr << ")"; } }
The client installs a plugin, which requires a new field to be added to details of the "EmailAddress" definition. It loads the definition from the default manager, modifies it (by adding the new field - a label field), and saves it back.
void addPlugin(QContactManager* cm) { /* Find the definition that we are modifying */ QMap<QString, QContactDetailDefinition> definitions = cm->detailDefinitions(); QContactDetailDefinition modified = definitions.value(QContactEmailAddress::DefinitionName); /* Make our modifications: we add a "Label" field to email addresses */ QContactDetailFieldDefinition newField; newField.setDataType(QVariant::String); QMap<QString, QContactDetailFieldDefinition> fields = modified.fields(); fields.insert("Label", newField); /* Update the definition with the new field included */ modified.setFields(fields); /* Save the definition back to the manager */ if (cm->saveDetailDefinition(modified)) qDebug() << "Successfully modified the detail definition!"; else qDebug() << "This backend could not support our modifications!"; }
The client retrieves a contact, modifies one of its details, adds a new detail, and then saves the contact back to the manager. Note that it uses the newly added field of the email address definition!
void editView(QContactManager* cm) { QList<QContactLocalId> contactIds = cm->contactIds(); QContact a = cm->contact(contactIds.first()); qDebug() << "Modifying the details of" << a.displayLabel(); /* Change the first phone number */ QList<QContactDetail> numbers = a.details(QContactPhoneNumber::DefinitionName); QContactPhoneNumber phone = numbers.value(0); phone.setNumber("123-4445"); /* Add an email address */ QContactEmailAddress email; email.setEmailAddress("alice.jones@example"); email.setContexts(QContactDetail::ContextHome); email.setValue("Label", "Alice's Work Email Address"); /* Save the updated details to the contact. */ a.saveDetail(&phone); a.saveDetail(&email); /* Now we must save the updated contact back to the database. */ cm->saveContact(&a); viewDetails(cm); }
© 2008-2011 Nokia Corporation and/or its subsidiaries. Nokia, Qt and their respective logos are trademarks of Nokia Corporation in Finland and/or other countries worldwide.
All other trademarks are property of their respective owners. Privacy Policy
Licensees holding valid Qt Commercial licenses may use this document in accordance with the Qt Commercial License Agreement provided with the Software or, alternatively, in accordance with the terms contained in a written agreement between you and Nokia.
Alternatively, this document may be used under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation.